Surgical Hub

Ceiling LED OT Light With Two Arm, 4+4 Dome
Lux 130000 each dome 
Structure made of SS 

FEATURES

*Vertical Autoclave inner outer made of Stainless steel gauge sheet fitted with pressure gauge safety value (weighted) pressure release value & rubber gasket for seamless/leak proof fitting available in Electric/Non-Electric various sizes:

A. 12” x 22”,

SPECIFICATIONS:-

*The outer, inner, middle jacket & lid are made of 304 grade stainless steel.

*the unit has radial locking arrangement for the lid. Provided with built-in safety value, pressure gauge, pressure release value & pressure control switch. Pressure is adjustable form 5 psi to 20 psi +/- psi. Supplied complete with cord, plug etc. to operate on 220 volts single phase 50 cycles.

OPTINAL ATTCHMENT AT EXTRA COST: *Vacuum Dry System

*Steam stock system & Moisture trap.

Working Chamber

Height x Dia

500mm x 300mm

Features

· Integrated with SpO2 probe and processing display module.

· Application: Hospital, home, community medical treatment, sports healthcare etc.

· Can measure SpO2 and pulse rate accurately

· SpO2 and pulse rate display, pulse rate waveform and graph display

· Battery voltage low indication

· Four directions and six modes

· Screen brightness adjustable

· Low Power consumption; shut off automatically when no signal

· Small volume (57(L)X 31(L)X 32(H)mm) light. convenient to carry

· Display mode:0.96” double colour OLED display, screen resolution: 1% for SpO2, Ibpm for pulse rate

· Accuracy:+(-)2%(70%~100%), unspecified (<70%) for SpO2, +(-)bpm or +(-)2%(select larger for pulse rate.

· Power supply: 1.5V (AAA size) alkaline batteries can work 20 hours continuously .

· Interference resistance capacity against ambient light and measurement performance at lo perfusion

• Rust proof
• Durable
• Fine finish

• Scrub station wall mounted Scrub Station,made of heavy duty
• Stainless Steel 304 grade designed for splash-free usage touching the taps soap dispensers directly with the handle
• The Station are available in the following options

• Durable
• High material strength
• Fine finish

• Handsomely Made For Long Service and to provide easier and surer Sterilization for use in Hospitals, Nursing Homes, Pharmaceutical Industries, And Laboratories
• Construction: Both chambers, back plate, end ring and steam generator are made of strong stainless steel sheet. All joints are strongly welded SS to SS and are completely leak proof. The outer jacket is thickly insulated which prevent heat loss due to radiation and covered with stainless steel sheet for elegance. The sterilizer is hydraulically tested to withstand twice the working pressure. Mounted on tubular M.S. frame with ground levelling flanges
• Safety Door: Provided with a positive radial locking safety door with neoprene rubber gasket which cannot be opened while the chamber is under pressure and disengages automatically when chamber is exhausted. This affords complete safety to the working personnel against explosive opening

• Fine finish
• Movable
• Durable

• Preprex transparent Crib with mattress, Trendlenburg / Rev. Trendlenburg. 5 cms castors. I. V. Rod. Pretreated & Epoxy Powder Coated

• S.S. Tray size: 22”L x 16” W (Approx)
• Rectangular CRCA tube mounted on 5 cms castors, height adjustable by side Knob
• Pre-treated and Epoxy Powder Coated finish
• Also available in S.S. frame & tray

• Easy to use
• Fine finish
• Durable
• Safe birth assistant, Minimizes risk of trauma and cephalohematome of fetal cranium, sterilizable- 50 mm, 60 mm & 70 mm cup, Connectable to any suction unit with gauge & release valve.  
• Temperature: Customize
• Pressure: Customize

We are involved in manufacturing, supplying, distributing, wholesaling, trading and retailing Saline Stand. In the manufacturing process, we make sure that high quality material is used. Furthermore, we customize these as per customers' requirements.

Features:

Technologically advanced

Fine finish

Robust in construction

Description:

5 Pronged base fited with 5 cm dia castors

12 mm S.S. Adjustable double hook I.V. Rod

To hold I.V. rod at one fixed height by knob

A-Plastic base with CRCA/SS pipe

B-S.S. Base with SS pipe

C- CRCA Base with CRCA pipe

• Fine finish
• Tough construction
• Easy to use

*The outer, inner chamber as well lid are made of thick stainless steel sheet.

*Supplied with timer, alarm & pressure control switch. To operate on A.C. single phase power supply.

*Pressure is obtainable from 5 psi to 20 psi +/- 1 psi.

Working Chamber

Height    x    Dia

450mm  x    250mm

500mm  x    300mm

• Rust proof body
• Fine finish
• Tough construction